Iron Industry

KAM products are committed to helping customers with the problem of monitoring plant machinery. Typical areas that have been commonly monitored include rolling mills, drives, gearboxes and cooling towers.

....................................................................................................

Coal & Quarry Industries

Within the Coal & Quarry industries, it is common for machinery to be running around the clock so the rotating parts of the machinery (for example: motors, gearboxes, pump, screens, crushers, conveyors) need to be continuously monitored to warn of bearing and component wear. As these machines are frequently installed in areas which are difficult to access and with high costs incurred when there are any failures, it is vital to be able to pre-determine potential problems so corrective action can be taken.

.......................................................................................................

Shipbuilding Industry

Over the last few years, there is a growing need to apply techniques to ensure that the condition of the ship and its associated plant is monitored.

A typical example of machinery that has to be monitored includes cargo pumps, turbochargers,ventilation fans and all other rotating parts . The output can be connected either back to a local control panel or to a portable data collector.

........................................................................................................

Wind Power Industry

The rotating parts of Wind Turbine generators need to be continuously monitored to warn of bearing and component wear. As Wind Turbines are frequently installed in remote locations with high costs incurred when there are any failures, it is vital to be able to determine potential problems before they occur so remedial action can be taken.
KAM Technik GmbH  has supplied many thousands of products worldwide to power providers and speciality windmill monitoring companies.

...........................................................................................................

Paper industry

Traditionally the paper ind ustry is very well developed in applying vibration monitoring to oversee the health of the main machine and any ancillary equipment. Over a number of years， KAM has supplied many thousands of products into this area of industry. In the wet areas, we always use the standard AC sensors with integrated silicon cable which has a sealing rating of IP68. These sensors can be supplied in top or side entry and are submersible.

............................................................................................................